Total Solution for Construction & Waterproofing.
- (+91) 9137627832
- nilesh.riddhienterprise@gmail.com
- 218,Sagar Prabhat,Co-Op Industrial Estate, Dahisar Check Naka, Dahisar(East), Mumbai, Maharashtra, India. 400068
© 2020 Riddhi Enterprise. All Rights Reserved
CRP-105
-
Product is not available
Country Of Origin: India
CRP-105
Carbon Fiber Primer
Carbon Fiber Epoxy Primer CRP-105
contains epoxy resin and Polyamide as
primary substances. It has a short pot life
and has excellent chemical and water
resistance. It penetrates to concrete
surface to strengthen adhesion
performance.
-
Additional Information
Injection Grouting Chemical
Carbon Fiber Primer
Method and Sequence of Use
1. Treatment of the Concrete Base
Remove pollutants from concrete (laitance, cement paste,
paint, etc.) using a hand grinder, maintain a clean condition
and polish the surface smoothly.
If cracks, defects or peelings of the concrete base are severe,
they must be repaired beforehand with epoxy crack repair or
high strength mortar.
2. To mix Carbon Fiber Epoxy Primer CRP-105
For immediate use, mix Carbon Fiber Epoxy Primer CRP-105
with its hardener at the 2:1 (by weight) ratio in a container
and mix with the electric mixer for about 3-4 minutes until the
mixture is in uniform color. Wash the empty container with
solvent after each use for repeated use at later times.
3. To apply Carbon Fiber Epoxy Primer CRP-105
Once mixed, place Carbon Fiber Epoxy Primer CRP-105 in
a container. Apply uniformly using rollers or brushes to the
surface. (Standard use: 0.3-0.4Kg/㎡)
Proceed with the next process once the epoxy primer is
completely hardened.
Re-apply the product in a sufficient amount for areas where a
vast amount of epoxy primer is required for much penetration.
-
Reviews ()
Write a review